PLEASE CALL US WITH ANY QUESTIONS YOU MAY HAVE - 310.534.1210

SOLID TORSION BARS AND SOLID ELIMINATOR "X" TORSION BARS
Our solid standard bar (4340) material is made in a superior vacuum melt electric furnace (aircraft quality) as opposed to open hearth furnace material, which does not respond to heat treatment as well because of impurities and grain structure. We feel that our standard bars are superior to any other brand of bars on the market!

Our Eliminator "X" torsion bars have been developed with an all new alloy material that is better than 4340. It contains amounts of nickel and chrome, etc. The advantage is a higher temperature material that Rockwells at 52 to 55 R.C., but is no more brittle than 46 to 48 R.C. 4340 bars. Therefore, you have a bar with just as much twist as a standard bar, but one that will last about twice as long as 4340 bars. Also, these new Eliminator "X" bars actually rebound quicker than 4340 bars. Eliminator "X" bars are NOT available in all sizes.

TUBULAR TORSION BARS AND ELIMINATOR "X" TUBULAR BARS
Our Tubular torsion bars save about 3 pounds per bar. In addition, they react more quickly than solid torsion bars because they don't have the center to slow their twisting motion. We made our tubular bars bigger in the center to allow for the hole and are stamped with the solid bar size. They will have the same rate as the solid bar, with a bigger center.

The ultimate quick reaction torsion bars are now here, to fill the need for the ultimate in quick reaction and light weight, we introduce our Eliminator "X" torsion bars. Made of our own superior material and rifle drilled to save 3 pounds, these bars provide even quicker rebounds rates, since there is no center to slow the twisting motion. In actual competition, top drivers say our Eliminator "X" tubular bars react quickly, with the rebound being more controlled due to the stronger material. Therefore, the Eliminator "X" tubular bars are easier to control for the shocks. Eliminator "X" tubular torsion bars are NOT available in all sizes.

1 1/8" X 1 1/8" TORSION BARS
S155 11/8" Tubular torsion Bar, with 1 1/8"X 48 Spline and 1 1/8" bushing diameter. We stock these bars in 29" long and 30" long in sizes .900 to 1.050, by .025,1065,1075 1.100 and 1.125. Our 11/8" tubular torsion bars have a 3/4" hole thru and bars over 1.065 are bigger in the center.

S157 Solid Elminator "X" Tubular Torsion Bar, with 1 1/8" X spline and 1 1/8" bushing diameter. We stock these bars in 29" long and 30" long in sizes .900 to 1.125 by .025.

S166 Eliminator "X" Tubular Torsion Bar, with 1 1/8" X 48 spline and 1 1/8" bushing diameter. We stock these bars in 29" long and 30" long in sizes .900 to 1050 by .025,1.065,1.075, 1.100 and 1.125.

1 X 1" TORSION BARS
S147 1" Solid Torsion Bar, with 1" X 48 spline and 1" bushing diameter. We stock these bars in 26" long and 28" long in the following sizes .750 to 1.000 by .025.

S154 1" Tubular Torsion Bar, with 1 " X 48 spline and 1" bushing diameter. We stock these bars in 26" long, 28" long and 30' long in sizes. 750 to 1.000 by .025. Our 1" spline tubular torsion bars have a 1/2" diameter hole thru to save weight.

7/8" X 7/8" TORSION BARS
S145 7/8" Midget Tubular Torsion Bar, with 7/8" X 48 spline and 7/8" bushing diameter. We stock these bars in 26" long in sizes .625 to .975 by .025. Our midget tubular torsion bars have a 1/2" diameter hole thru and bars over .850 are bigger in the center, so one bushing must be removed before installing bar.

S150 7/8" Solid Torsion Bar, with 7/8" X 48 spline and 7/8" bushing diameter. We stock these bars in 26" long in the following sizes .625 to 1.000 by .025.

SWAY BARS
S145 7/8" Tubular Sway Bar, 23", 25" and 27" long.

S154 1" Tubular Sway Bar, 26" and 28" long.

S155 1 1/8" Tubular Sway Bar, 16", 18", 18.5", 20", 29" and 30"

PORSCHE TORSION BARS
S166-911F 911 Front Torsion Bar, Available 21mm, 22mm, 23mm, and 24mm.

S166-911R 911 Rear Torsion Bar, Available 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm and 35mm.

S166-914F and S166-944R Special Order Only.

Available in Tubular Eliminator "X" Bars Only.

JAGUAR TORSION BARS
S157-6-0765 Stock Size 6 cly Torsion Bar.

S157-6-0835 Oversize Size 6 cly Torsion Bar.

S157-6-0880 Oversize Competition Size 6 cly Torsion Bar.

S157-12-0755 Stock Size V12 Torsion Bar.

S157-12-1050 Oversize XKE.

Available in Solid Eliminator "X" Bars Only.